MYTH#1:

No. Dirt is abrasive-like sandpaper. Every time you step on your carpet, you grind dirt into the carpet fibers. This cuts your carpet, just as if you had used a knife. A dirty carpet will not last as long as a clean carpet. And while vacuuming helps-by itself, it’s simply not enough. The longer you wait to have your carpet cleaned, the more damage you do to your carpet and the faster it wears out.

MYTH #2:
The only reason to clean carpets is to remove the dirt.

No. As you probably know, outdoor air contains pollens, fungus, bacteria, air pollution, cigarette smoke, car exhaust – and hundreds of other chemicals. When you come into your home, you carry those pollens, bacteria and chemicals in your hair and on your skin, clothing and shoes. Not surprisingly, all those chemicals and toxins wind up in your carpet.

If you have allergies, asthma, emphysema, or other breathing problems – one major source of your problem could be the pollens, fungus, smoke and chemicals in your carpet. Call Mr. Carpet Cleaner today (801) 561-1513 for more information.

MYTH#3:
One method of carpet cleaning is as good as another.

No. The dry cleaning methods – which are dry foam, dry chemicals and dry compounds – do not rinse your carpet in any way. Instead, they leave a dirty residue. You might say they clean your carpet only halfway. The most effective cleaning method is hot water extraction.

MYTH #4:
Having the right equipment is all a company needs to clean your carpets properly.

Not true. Many companies own hot-water cleaners but very few companies teach their employees how to use them properly. This is why it’s important that you choose your carpet cleaner carefully. The best cleaning companies are those that have been certified by the Institute of Inspection, Cleaning and Restoration Certification, known as the IICRC. If they are not certified, don’t use them.

MYTH #5:
The company that offers the lowest price is the company you should hire.

No. We’ve seen so many problems arise from lowest-bid companies that we suggest you never hire the company that quotes the cheapest price. The two most common problems are:

(1) The price may not be for the services you want performed. The company may be equipped to remove only the dirt from your carpet. But you may want bacteria, fungus, pollens, dust mites and tobacco residues removed as well.

(2) The price you see advertised may not be the price you pay. Many homeowners have learned that the low price they saw advertised only lasted until the carpet cleaner got into their home. Then they were pressured into paying a lot more for a variety of add-ons. (Some carpet cleaners even break the law by using illegal bait-and-switch tactics.)

MYTH #6:
Any honest carpet cleaning company should be able to give you an exact price quote over the telephone.

We wish this were true, but it isn’t.

Honest, reputable carpet cleaning companies like Mr. Carpet Cleaner almost never price carpet cleaning by the room. Instead, carpet cleaning is usually priced by the square foot. So if you’d like us to tell you the exact cost of cleaning your carpet, we need to know the exact number of square feet that you want cleaned. To get an accurate measurement, we use a measuring wheel to calculate the exact size of the carpet area.

Call Mr. Carpet Cleaner today (801) 561-1513 for more information on Myths VS Facts in Carpet Cleaning.

Tip One On Blind Cleaning Taylorsville

The first thing I do when I meet a client about blind cleaning Taylorsville is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning Taylorsville

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning Taylorsville

Tip One On Blind Cleaning West Valley City

The first thing I do when I meet a client about blind cleaning West Valley City is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning West Valley City

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning West Valley City

Tip One On Blind Cleaning South Salt Lake

The first thing I do when I meet a client about blind cleaning South Salt Lake is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning South Salt Lake

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning South Salt Lake

Tip One On Blind Cleaning Murray

The first thing I do when I meet a client about blind cleaning Murray is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning Murray

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning Murray

Tip One On Blind Cleaning Holladay

The first thing I do when I meet a client about blind cleaning Holladay is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning Holladay

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning Holladay

Tip One On Blind Cleaning Herriman

The first thing I do when I meet a client about blind cleaning Herriman is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning Herriman

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning Herriman

Tip One On Blind Cleaning Draper

The first thing I do when I meet a client about blind cleaning Draper is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning Draper

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning Draper

Tip One On Blind Cleaning Cottonwood Heights

The first thing I do when I meet a client about blind cleaning Cottonwood Heights is determine the type of blinds they have. If the blinds are wood, then I know I can’t soak them. If they are painted aluminum or metal, then i know I can’t use certain types of chemicals. So this is my preparation stage and this same step should be followed for your own blinds. Find out what type they are and then take extra precautions while cleaning.

Different Methods For Different Types Of Blind- Blind Cleaning Cottonwood Heights

After I determine the type of blind, then I will either take them down (if plastic) or clean them in the home (wood or metal). If I am cleaning the blinds in the home (this is my first tip), I will use a lint-free rag and a 5 gallon bucket mixture of 1 cup ammonia to 4 gallons of water. I ensure the rag is damp enough to clean, but not dripping or else it will leave streaks after it dries. If the blinds are really dirty, then I will typically have to clean my rag every two to three slats. Also the water in the bucket needs to be changed regularly. Take extra time on grimy blinds. It will take time, but it will eventually come off!

My second tip, if the blinds are plastic, is to take the blinds to my shop to soak them in warm water and a special chemical. For your purposes, ammonia should work fine (ammonia can be found at Home Depot or Lowe’s). Depending on how dirty your blinds are, soak them longer. Really dirty blinds may take about 30 mins to an hour. After soaking them (use a 3/4 full bathtub of warm water), use a rag to go over them and then rinse them. Use a towel to dry the blinds and ensure all visible water has been removed.

It’s a lot of work for dirty blinds, but the work will pay off and your mother-in-law will surely notice. If you have any questions, most window cleaning professionals would love to come for a free estimate and will give you more information on what your blinds are.

If you need more info check out: Blind Cleaning Cottonwood Heights